We have worked hard to find the highest quality lights with the most useful, brightest light patterns for the best price in the industry and all with a 2 year warranty. PLUS offering the complete plug-and-play harness package and switch & mounting options - no-brainer one-stop-shop!
•The Dual 10W 2" bar is super bright for its size and is the best all-around choice for compact size with powerful light output and broad usable pattern. 20W total consumption
•The Dual 5W 2" bar is almost as bright as the 10W, and is a great all-around choice with the best balance of brightness with low power draw and compact size. 10W total consumption
•If you do lots of night riding and want the ULTIMATE light that does it all then the Side Shooter is for you. This light gives the amazing distance of a focused pod light and has 4 additional LED chips that cover everything in front of you with a 170 degree solid spread. 40W total consumption - not great for 2-strokes or MX bikes with weak stators, and also be careful which wires you put that load on
•Our single row 4" Quad 5W lightbar competes with the industry standard if you like the bigger look. Comparable illumination to the Dual 10W - effective lit area is less "deep" but slightly wider. 20W total consumption
•The Scene light gives a broad 120 degree ball of light which is awesome in the trees especially when paired with a helmet light. 20W total consumption
All lights are built with industry-recognized Cree LED chips to demanding quality standards including the highest possible IP69K waterproof tests, with a 50,000 hour typical lifetime. The standard mount bracket is a single central 8mm bolt (included).
We also carry Mountain Lab Helmet Lights
You can buy just the generic bracket or switch on this page.
FAQ - How to mount? A - Our recommended mounting setup is the hole in the billet One-Piece Top Clamp mount that is part of the Forcefield Handguards (or available separately). You can also get the panel to mount a switch or your Trail Tech TTO temp guage with that setup.
FAQ - Will the "low and back" mounting work with my bike? A - Since the light then becomes lower than the bars themselves, there won't be enough room to utilize this configuration unless you are running about 1" of bar risers. For instance with C3 Bar Risers, the Mid height will get you where you need to be, but depending on the bike, you may still need to modify your front number plate slightly. With Tall risers it's smooth sailing for sure.
Some knowledge of wiring required for setup.
This product might be at a location near you! Click to see full Dealer page.