We love the AirPro kits on all our bikes and we bet you will too - noticeable fork performance improvements without the hassle or $$$$$ of traditional fork upgrades.
With the added weight of a snowbike kit and aggressive riding, you're bound to use up your travel too quickly and run into harsh bottom-out issues. The AirPro Snowbike Bottoming Kit is a quick and simple modification that allows you to add 10-15 PSI to the outer chamber of both spring and air forks, giving you an extra layer of tunability and defense against bottom-outs, or even worse, bent lower tubes.
As the fork goes through its travel, the air volume compresses and the resistance ramps up dramatically. So bottoming out is pretty much solved for like 85% of riders (the main people we still recommend a full custom fork rebuild service to are racers or folks sending 20 foot drops). The other great part about AirPro compared to a respring+revalve is that the forks remain supple off the top, maintaining small-bump sensitivity and steering feel with no harshness.
AirPro even offers a no questions asked lifetime warranty.
The kit swaps back in less than 10 minutes when the bike is ready to ride dirt trails and motocross tracks.
Airpro's new kits have all the parts you need and clear instructions which helps everybody! Here's Airpro's helpful guide to help you select the right one:
Another format of the fitment table:
KTM/Husky; WP AER 48 => CDAISBK-103
KTM/Husky; WP XPLOR/4CS => CDAISBK-102
KTM/Husky; Open Bath => CDAISBK-101
•Up to 2014 SX/SX-F
•Up to 2013 XC/XC-F
•Up to 2016 EXC/XCW
•All 2014 Husky
•Marzocchi forks (typically aftermarket)
Most spring forks => CDAISBK-201
•ALL YAMAHA YZ/FX/WR
•Up to 2014 RMZ 450
•Sachs forks (typically aftermarket)
Some Honda spring forks => CDAISBK-201B
Showa air forks => CDAISBK-203
ZF forks => CDAISBK-205
This product might be at a location near you! Click to see full Dealer page.