Description
Are you here for the updated valve with a custom-engineered proportional ball opening for vastly improved heat output tunability on C3 CenterFlow Coolant Heated Bars? You're in the right place! It's at the top of the dropdown.
- If you haven't yet, click the "Ball Valve Info" tab to read what all the hype is about
- Reminder - the valve you already have might already be the Proportional optimized one, even if you got it last year - all valves with extra white on the handle tip (like in the pic) DO have the gradually-adjustable internals. It is what's provided with all new heated bars.
- Inversely of course, all valves with handles that are plain black (save for the C3 logo) were manufactured with the off-the-shelf ball, which gives a bit more of an on-off effect.
- Also, don't forget the super helpful tips in the "Push-to-connect Guide and Assembly Kit Walkthrough" tab when you go to do the installation.
- If you don't still have your Assembly Kit, you might consider picking up a new one for a few bucks.
As per popular demand, we've got a wide collection of useful push-to-connect and pipe thread fittings and valves! These are fairly widely used but sometimes hard to find. These are the styles and sizes we use with C3 thermostats and heated bars, in a few other configurations - useful for running a carb heater, custom heated accessories (heated front numberplate bag perhaps??), or your own projects.
If you have a carb heater that you need to connect to a C3 thermostat, you can get the "bundle" kit here: https://c3powersports.com/products/riders-edge-carb-heater-complete
Available:
- Valve, 1/4 turn, 1/8" MNPT to 1/4" tubing Push-to-Connect, straight
- Valve, 1/4 turn, 1/8" MNPT to 1/4" tubing Push-to-Connect, 90 degree elbow (quantity 1)
- Tubing, 1/4" OD, High-Temp Nylon (uncut, bulk per meter) (Note that tubing is pressure-rated to 125 C but at low pressures you will not have issues below 300 C or more)
- Tubing, 1/4" OD, High Temp Nylon 1.2 meter pre-cut length
- Fitting, 1/8" MNPT to 1/4" tubing Push-to-Connect, straight
- Fitting, 1/8" MNPT to 1/4" tubing Push-to-Connect, 90 elbow, swivel
- Fitting, 1/8" MNPT x 1/8" FNPT, 90 street elbow
- Fitting, 1/8" NPT Male Plug, Zinc plated brass, Socket head
- Fitting, reducer bushing 1/4 MNPT x 1/8 FNPT
- Fitting, 1/8" FNPT to 1/4" tubing push-to-connect, straight
- Fitting, 1/8" FNPT to 1/4" tubing push-to-connect, 90 elbow, swivel
- Fitting, 1/8" MNPT to 1/4" tubing push-to-connect to 1/4" tubing push-to-connect, run tee
- Fitting, 1/4" tubing push-to-connect 3-way union tee
- Fitting, 1/4" tubing push-to-connect to 1/8" MNPT to 1/4" tubing push-to-connect, branch tee
- Fitting, 1/8" MNPT to 1/8" FNPT to 1/8" FNPT run tee
- REPLACEMENT HANDLE and screw only for elbow push-to-connect valve