YETI SnowMX ski outside runner (aka side blades).

Item notes: Note these are singles - IE if you're doing both sides you will need to buy qty 2.

Inspect/Replace notes: You should visually inspect your ski side runners every couple rides or so. Dull edges can be resharpened with a file or grinder. I would suggest they should be replaced once there is less than 1/8" (3mm) or so left of the vertical steel edges exposed from the ski plastic, for both handling reasons and safety reasons - worn ski runners can contribute to a loss of control on the trail ride back to the truck.

Depending on the amount of trail riding you do and the condition of the trail/snow, the outside runners typically last quite a while, perhaps 40-80 hours of riding.

Fitment notes: This part fits every Yeti model to date.

Important: it's not recommended that you buy Yeti parts online unless you're confident you've determined the correct part numbers for your requirements.

• Yeti's Parts List page is a great resource: yetisnowmx.ca/parts-list
• If you're mounting the Yeti on a new bike, you should also be aware of the YETIverter to help determine adapter parts: yetisnowmx.ca/yetiverter
• More of our spare parts webpages can also be found here: c3powersports.com/collections/yeti-all-spare-parts

You could also check the tab above if there's a Yeti Dealer near you.

Of course, we are also happy to help if you need! Chat box in the corner.

C3 and Yeti are sister companies operated out of the same building, therefore all Yeti parts should always be in stock! But, it's possible that some items are running low or have been phased out, in which case an order could be delayed and/or we'd follow up with you to make changes/substitutions.